Ip Camera Software Viewer Help Installing Our Cctv Software On Pc Please!!!!!!!!?
Help installing our cctv software on pc please!!!!!!!!? - ip camera software viewer
Hello
We have just installed the cameras and everything in its place, but we can not access the pc viewer d6 program. We have joined the digital recorder for the router and it detected and all-IP gateway, etc., but comes with the software in the host name of the computer, said host port, username and password, password, and if the remove information about the connection. What we dig in the host name implemented and why the work on the measurement? We've searched the net and some say we need to show Firwall, but if in the case of our virtual server routers, have said that we need to put into the port of entry and private marina and we will do what they are . Can anyone help me please! or someone who does? So that the viewer does not allow you to D6 PC, click the little wrenchLove to make adjustments?
Help!
|
2 comments:
Would it be better, on the grounds of manufactueres information and installation instructions look like? But since you have not provide enough information for the software, the display of the D6 vague. In any case, I think I could look like this
http://www.networkwebcams.co.uk/blog/200 ...
Hello, please follow these steps you may be able to solve the problem.
1) Check if you can test the DVR from their computer. If not, the IP is configured correctly.
2) If the DVR-test and then check the user name and password on the DVR and correct input of your PC Viewer Software
3) If you still have problems that need to check port numbers on the DVR to see two port numbers, and others for research. The port numbers must be identical to the DVR and PC software display.
4) Check the manual installation in the network configuration for more information about the port numbers.
Post a Comment